Consumers' perspective on the customized brand of

2022-07-22
  • Detail

With the increasing improvement of life, the environmental requirements for home life, the importance of environmental protection, the requirements of quality and beauty, especially in some villas,

with the increasing improvement of life, the environmental requirements for home life, the importance of environmental protection, the requirements of quality and beauty, especially in some villas, the overall home and panel customization have become the new favorite of building materials, For the whole furniture customization, a new favorite in the industry, what aspects should consumers look at the whole wardrobe customization brand

1. Materials: first of all, it depends on the materials used. The overall furniture customization is based on the environmental protection degree, quality, thickness, etc. of plates. Egger plates imported from Europe should be the most environmentally friendly materials. However, there are good and bad materials for customized furniture. You'd better go to the factory to investigate. The quality of products depends on the quality of materials

2. Hardware accessories: it is indispensable to customize the overall furniture, such as door hinges, cabinet door hinges, guide rails, and places where the upper and lower pulleys of the sliding door often rub are also prone to potential safety hazards, so we should choose hardware accessories with high strength, wear resistance, low noise and other characteristics. When shopping for hardware accessories of customized furniture, you must understand clearly that you should not be greedy for cheap. The late cloth of inferior hardware accessories is not only troublesome, but also may cause safety hidden gains outweigh losses

4. Overall home customization design: this link is a very important core link. To design products according to the room area and functional needs, we must first meet the daily living needs of family members. In the design, the type and size of products should be determined according to the number and situation of family members

as a business owner, try to put forward their own ideas and requirements, and consider the function and layout of each room. For some details, it is best to have detailed requirements. These requirements must be put forward before the designer starts to design. Once the designer has designed, it is necessary to completely deny and start over, which is a troublesome thing for both the designer and the owner

6. Processing technology: the customized processing technology of the overall furniture is the best embodiment of the comprehensive strength of a manufacturer. First, the corners and other parts are free of roughness, and the paint film is free of wrinkles, stickiness, cracks and bubbles. Touch the finished furniture with your hand. A good paint process is very flat and smooth. The edge of the plate should be natural, without roughness and cracks. The stitching of corners, the treatment of contraction joints, and the dynamic and three-dimensional feeling of carving all consider the processing technology

when encountering environmental changes or unexpected situations, the quality variation is serious, and it is often difficult to restore the original use function. Most of the quality problems of low-cost products will be exposed within 2-3 years of use, and once they occur, they are difficult to repair. On the contrary, high-quality products usually have a service life of 10-20 years or even longer. If you pay an extra 30-40% price, you will get comfort and confidence along with the whole process of using customized furniture products

consultation Tel.: 400-772-0556

北京皮肤病医院

哈尔滨男科医院

杭州性病医院

Copyright © 2011 JIN SHI